Beremeal Production at Barony Mill Part 1: Drying the Bere to Prepare for Milling
|Published on October 29, 2021|Mill News


Most folk don’t get to see what goes on in a mill over winter and so over the coming weeks, during our milling season, we will be publishing several short pieces with the hope of giving some insight into the processes in the production of Beremeal.
The Bere we receive into the mill has already been dried down to around 14% moisture ready for storage.
To make it ready for milling we need to dry the grains down to just 7% moisture.
This is done in a traditional method by spreading 1000kg of bere across the stainless steel mesh that makes up the drying floor on the top, 3rd, floor of the mill.
Our kiln is fired by burning the husks, the outer inedible shells of the grain, in our kiln.

The temperature in the kiln slowly rises to between 25 and 30 degrees.

The Miller tends the fire in the kiln, which is on the ground floor, and after each hour goes up to the drying room and turns the grains over to make sure they do not become scorched.
There are windows around the drying room and once these are clear of condensation the Miller is fairly sure, because of his experience, that the grains will be at the correct level of moisture for milling.
To make certain he tests the moisture content and once he’s happy he leaves the bere to cool on the drying floor overnight.
Each tonne of bere produces enough husks to dry the next tonne of bere.
The last tonne plus any extra is stored over summer, ready for the first drying for the next season, which starts in the Autumn.